0
Owner's of the iOptron Telescope iOptron Telescope gave it a score of 0 out of 5. Here's how the scores stacked up:
2
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 935-2800 | Toll Free (866) 399-4587 | www.iOptron.com
Quick Setup
1. A. Setup tripod: Expand the tripod legs and lock the
Tripod Spreader so that the tripod legs stay open
(Figure 1). Adjust the tripod height by unlocking and
re-locking the tripod legs to desired height. Position
the tripod so that the Alignment Peg faces north. (The
Alignment Peg may be moved to the opposite
position if used at latitude lower than 20º to avoid
counterweights hitting the tripod leg)
。
Figure 1
1. B. Setup pier:
Unthread the Pier Locking Screw
(This screw is only used for pier storage).
Separate the Pier Base with Legs from the Pier Tube.
Remove the Pull Rods from inside the pier.
Figure 2
Figure 3
Move the Pier Foot from the end to the side.
Figure 4
Spread the Pier Leg. Put the Pier Tube onto the Pier
Base, with Pier Alignment Slot aligned over the
Alignment Tab on the Pier Base.
Figure 5
Adjust the length of the three Pull Rods. Hook one
end of a Pull Rod onto a bolt located on the Pier Leg
and the other Pull Rod end onto the mounting beam
inside the Pier Tube. Evenly tighten the Pull Rods.
Make sure there is no gap between the Pier Base
and Pier Tube.
Alignment Peg
Tripod Spreader
Tripod Lock
Pier Locking
Screw
Pier Base
Pier Tube
Pull Rods
Pier Foot
Pier Foot
(Storage
Position)
Pier Leg
Pier Base
Align Slot
Align Tab
Find Your Products By Category
Please Login
