Bushnell Laser Level FUSION 1600 User Manual

0

Out of 0 Ratings

Owner's of the Bushnell Laser Level FUSION 1600 gave it a score of 0 out of 5. Here's how the scores stacked up:

  • Reliability

    0 out of 5

  • Durability

    0 out of 5

  • Maintenance

    0 out of 5

  • Performance

    0 out of 5

  • Ease of Use

    0 out of 5
of 156
 
14
To select between these modes, first turn the unit “ON” by pressing and releasing the POWER button. Next, press
and hold the MODE button for three seconds to get into the SETUP menu. e brightness is displayed first and
can be changed by pressing the MODE button or accepted by pressing the POWER button. en press the power
button until you see the existing compensation mode indicated by either the “Bow” symbol ( ), the “Rifle” symbol
( ) lit with one of the ballistic groups (A thru J) displayed and flashing, or no indicators lit and the message
( ) flashing.
e modes can be cycled through in a circular fashion by pressing and releasing the mode button. e order of modes
is a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I,
RIFLE J, REG, etc. When the bow selection is displayed, the “BOW” icon will flash and when a “RIFLE: selection
is displayed, the “RIFLE” icon and ballistic group will be flashing. When the ( ) is displayed, the message (
)
will flash within the display.
Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER button.
Following this selection, the current unit of measure, “Y” for yards or “M” for meters will flash in the display and the
SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure. When the desired unit of measure
is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1. Variable Sight-In (VSI™) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or
300 yards or meters) and provides holdover / bullet-drop data in inches, centimeters or MOA. e “SD” (Sight-In
Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e. 100,
150, 200, or 300). e Sight-In Distance options can be cycled through in a circular fashion by pressing and releasing
the mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the power button.

   Find Your Products By Category